Machinist-Materials, 

Home Page  -  All materials index    

Adhesives: A number of our customers have asked about different types of adhesives for use with mechanical plastics. We have gone to a couple of our material suppliers and here are a number of different products that should be able to accomplish most of your adhesion tasks. 

Please note: We have no personal experience with these products, we do not stock these products, we order as per request and it usually takes about a week for us to ship these adhesives. Most of the information we do have is published right here. We would suggest if you have specific use or application questions that you go directly to the manufacturer.  At the bottom of the page is contact information for IPS and Caseway. 

SC-325 Polycarbonate Adhesive Size 
For Polycarbonate to polycarbonate (Lexan, Tuffak) of Polycarbonate to dissimilar materials: Acrylic, Vinyl, Styrene, PVC.   This is the simplest method of joining polycarbonate to polycarbonate or dissimilar materials. Advantages: Water thin and good bond strength. 

Link to MSDS for SC-325

Pint
Gallon
WO-1707 ABS Adhesive Size 
Milky medium thickness, fast set.  For ABS to ABS only, dries almost clear.  Pint
Gallon
WO-2354 ABS Adhesive Size 
Thin, fast set, solvent type for ABS, Styrene to themselves. Not for joining dissimilar materials.   Pint
Gallon
WO-3 Acrylic Adhesive Size 
Water thin, very fast set, solvent type for Acrylics. Will also bond other plastics such as Styrene, Butyrate and polycarbonate to themselves.    Pint
Gallon
WO-4 Acrylic Adhesive Size 
Water thin, slow set, solvent type for Acrylics. Will also bond other plastics such as Styrene, Butyrate and polycarbonate to themselves.    Pint
Gallon
WO-5 Acrylic Adhesive Size 
Water thin, clear, slow set, solvent type for Acrylics. Especially formulated for Plex MC, Cyro FF and ICI Perspex.  Pint
Gallon
WO-16 Acrylic Adhesive Size 
Medium thickness, Fast drying, high strength. Bonds acrylics to styrene, butyrate, polycarbonate and other porous surfaces.  Pint
Gallon
WO-1802 Acrylic Adhesive Size 
Medium thickness, Medium Set for bonding Acrylic to ABS, styrene, butyrate and PVC.   Pint
Gallon
WO-#7 PETG Adhesive Size 
A water thin, high strength, solvent type adhesive for bonding PETG to PETG.       Pint
Gallon
WO-1007 Vinyl Adhesive Size 
A clear, thin, high strength, very fast set, for bonding rigid vinyl and ABS.  Pint
Gallon
WO-1829 General purpose Tan Adhesive Size 
A medium thickness, flexible bond, elastomer base for many plastics and non-plastic materials. Good for vinyl, urethane foam, polyester, acrylics, wood, metal and others.  Pint
Gallon

WO adhesive are Weld-On, made by IPS their contact information is: 

IPS
455 West Victoria Street
Compton, CA 90220
Phone:  800-421-2677
http://www.ipscorp.com

SC-325 and other SC products are manufactured by 

Caseway Industrial Products
14516 New Hampton Place
Fort Myers, FL 33912   USA
Phone 239-561-1021    As far as we know they do not have a website. 

 

Home Page  -  All materials index